GSAK Stats – Graphics – Help

[Sparse Grey HackleParticipant]

I recently updated “My Public Profile” on GC Com.

I ran the GSAK (Version 7.7.0.109) Macro (FindStatGen3.gsk Version 3.8.03) as I usually do.

However, this time, after the running the macro and pasting it into my profile with the updated stats, I noticed that some of graphics for my GSAK stats were not being seen.

The horizontal bar graphs are featureless with only red “x’s” in them.
And, the vertical bars for varoius stats have no color value in them.

And, the “pie chart” graphic for “Finds by Weekday” and “Finds by Container” have taken a hike also.

All thiis is visbile right after I run the stats but after the cut n paste to update those graphics are gone,

This happened before and after I had done the update to the current GSAK versions. (Same results also on my PC at home and at work.)

Check it out.

http://www.geocaching.com/profile/?guid=3b78c1ce-4cf4-4280-9d94-89b3c4499b94

What is going on? ❓

Sparse Grey Hackle

___________________________________________________________
“I am telling you if it isn’t one thing it;s something else” 🙄

[Team Black-CatParticipant]

When the macro runs, select Options and make sure that the Use Shaded Bars box is checked and the Remote option is selected. It should stay that way every time, but might have gotten changed for some reason.

[Sparse Grey HackleParticipant]

@Team Black-Cat wrote:

When the macro runs, select Options and make sure that the Use Shaded Bars box is checked and the Remote option is selected. It should stay that way every time, but might have gotten changed for some reason.

➡ BINGO Brian, that did it! 💡

http://www.geocaching.com/profile/?guid=3b78c1ce-4cf4-4280-9d94-89b3c4499b94

Thanks! SGH

[Author]

Posts