My Garmin Colorado 300 Review

Home Forums Geocaching in Wisconsin Tech Talk My Garmin Colorado 300 Review

This topic contains 6 replies, has 4 voices, and was last updated by  The Yinnies 15 years, 6 months ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #1729569

    HeliDood
    Member


    Been using my Colorado for a few days now. I find the interface to be a bit clumsy, but overall I’m liking a lot of the features of this machine.
    Here is a list what I like and dont like about it.

    Disappointments:

    • Scroll wheel: It takes forever to enter coordinates manually. I prefer the joystick on the old eTrex
    • Navigation mode: I would have liked to see a larger arrow. Proximity rings would have been a nice feature
    • booting: It’s locked up twice on me since I got it on Tuesday. Once after I loaded a new gpx file, the second time seemingly for no reason at all. I had to remove the batteries to shut it down before rebooting.
    • Maps: very slow to refresh when trying to pan around
    • Screen: hard to view in bright daylight even with screen brightness all the way up
    • Cache List: selected the GC mode while driving. List shows nearest caches first, but does not auto-refresh keeping the nearest cache at the top of the page.

    Likes:

    • Paperless caching. I like how I can get whole cache descriptions, rating, logs and hints right on my GPS.
    • Boots relatively fast
    • Satellite acquisition: very fast. Within a couple seconds of turning on the machine I have a GPS fix (although it is a low confidence fix initially)
    • Accuracy: Only have the eTrex legend to compare to, but the Colorado seems to run circles around the eTrex in the accuracy department. I’ve placed a bunch of caches with the eTrex and I’ve gotten feedback saying they were 30-40 feet off. I doubt I’ll have this problem with the Colorado
    • Wherigo looks promising

    Other:

    • The website, manual, and others picture the Colorado 300 with street maps. I expected my Colorado 300 to come with street maps. After playing around for about a half hour, and not finding any street maps, I came to the conclusion that Garmin wants me to spend $100 to see street maps. 🙁

    Conclusion:

    • While the Colorado is a nice unit with a lot of advanced features, especially features useful to geocaching, had I demo’d the Colorado prior to purchasing it, it is very unlikely that I would have purchased the Colorado.

    I’m disappointed at my self more than anything, by not doing comparative shopping or better researching GPSr’s.

    On a scale of 1-5, I wouldnt rate my Colorado 300 any higher than a 3.

    #1922053

    -cheeto-
    Participant


    I came to the conclusion that Garmin wants me to spend $100 to see street maps. Sad

    About the only way to get a good street map from garmin without paying 100 bucks “extra” is to get a Nuvi 😉

    Even the 500 dollar Oregon (base model) does not come with a street map. Same old basemap. They like selling maps too.

    #1922054

    HeliDood
    Member


    Yep. I’ve got a Nuvi, too. I take my Nuvi everywhere I go, or should I say my Nuvi takes me every where it goes?

    I bought my Nuvi 200 sometime in 2007. It’s been pretty good.
    The only problem I really have with the Nuvi is that (since it’s a couple years old) I get an annoying message at startup that says something like,
    “Your map is over a year old. Insert $100 here to remove this annoying message for 12 months”

    The main reason I’d like a street map on my Colorado is for when viewing caches on the map. It’d be good to reference the location of caches and get a good way to figure out exactly where they are before attempting to drive over there.

    #1922055

    HeliDood
    Member


    I just installed the Wisconsin Topo map. What a difference that makes.

    #1922056

    SammyClaws
    Member


    You might want to load web updater on your computer and makes sure you’ve got the latest firmware load on your colorado too. While there are a lot of new features added to the Oregon line, some of those have been making it to the colorado too.

    #1922057

    HeliDood
    Member


    One of the first things I did after unboxing the Colorado was updated the firmware. Im on v3.20

    Yesterday, after powering it on, I noticed that the altimeter data was indicating that I had ascended about 800 feet, from my base (home) elevation of 1020 feet ASL, saying I was at 1800 feet.

    I realize changing weather will affect altimeter data, but not 800 feet worth.
    If it happens again, I’ll report the issue to Garmin to determine if I have a defective unit.

    #1922058

    The Yinnies
    Participant


    First, you can put all the caches you want on the Nuvi using GSAK. I had a Colorado when they first came out and sold it a few months later. There were a lot of problems with it. They have most of them fixed, but they are not doing much with it anymore.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.

Purveyors of Fine Tupperware