This topic contains 4 replies, has 4 voices, and was last updated by 
Barry Butrymowicz 11 years, 7 months ago.
-
Posts
-
updated mac to maverick and had to update my vmware fusion and reload gsak. how can i check to see if the caches loaded into the oregon 600? there should be 150, and they are all in florida. they don’t show up when i search caches. (too far away maybe?)
When you plug it into the mac do you see the .gkk file (or is it .ggk )?
If so they should be there. I’ll also page out and then scroll over/down to the general area of the cache locations and then zoom in to double check they are there.
Following the signals from space.
file is there. i tried to use the map to go to florida. some of the caches were there, but not all.
In your Oregon, you should be able to turn off the GPS. Go to the Satellite page and hit the menu. Change to use with GPS Off. Then you will have the option to Set Location on Map. Do that, now search nearest GCs. If they are missing, there is something wrong.
do you have any filters set up, I have done that by accident, and it looks like they are not there.
You must be logged in to reply to this topic.