Home › Forums › Geocaching in Wisconsin › Help › Park stickers
This topic contains 14 replies, has 6 voices, and was last updated by Team Roman Geoskis 23 years, 5 months ago.
-
AuthorPosts
-
04/03/2002 at 4:17 am #1720015
I just bought a new Geocache vehicle and am donating the old Taurus to some charity soon. I have a state and Waukesha County sticker on the windshield and for the forty dollars, want to try removing them and putting them on the new car. Yeah, I know, whats $40 versus $20K+ for a new bush banger but I’ve got two cars and two motorcycles and any one of them could be taken to the park. I have never seen the sense in being forced to have stickers for each! So back to pinching pennies. Has anyone been successful tranfering these stickers? I’m thinking of using a hair drier to soften the adhesive and hoping that enough is left to adhere to the new windshield.
Steve Bukosky
Waukesha04/03/2002 at 5:48 am #1739390Unfortunely, the DNR has come up with crafty ways to prevent you from doing this. They place perforations on the sticker that rip when you pull. The county stickers are probably much the same. I think a hair dryer is your best chance, but I have never tried it. I transfered one back in 1987 when they made them nice and durable. I kept getting DNR people asking me if it was affixed with it’s own adhesive. It was, but just barely
04/03/2002 at 12:23 pm #1739391The story we have gotten from the DNR (Pennisula State Park Office in particular) is that you are welcome to bring in the pieces to exchange for a new sticker everytime you want to move it between vechicles. So, you might check with the county office and see if they will do the same. This would get the sticker to the new cachemobile, but not very useful if you want to move it frequently.
Now, there is a movable solution, but I’m certainly not suggesting it… as at least the DNR says by law the sticker must be directly adhered to the windshield
If you were to say take a piece of clear plastic, say contact paper, or that decale material, or perhaps even plastic wrap, and then stick the decale to it instead of the window, then just a tad bit of static cling or perhaps a diluted dishsoap solution would hold it to the window, allowing easy removal. But that of course would be against the rules, so this discussion is purely hypothetical not to be tried at home!
04/03/2002 at 1:44 pm #1739392Heck, I just got my new 2002 sticker this past saturday, and was pretty irked when I tried to get the old 2001 sticker off my windshield… that IS some nasty adheasive!I managed to remove only small chunks of the corners Now I have a 2002 sticker above the 2001 sticker. What DOES work best to get those things off… razor blade? Hair dryer? Alcohol?
04/03/2002 at 1:54 pm #1739393I always just apply mine above the previous year’s sticker, and work my way up the windshield…
I’ve never owned a vehicle long enough to reach the top!
04/03/2002 at 3:07 pm #1739394Best way to get them off is to use a razor blade. Any remaining adhesive can be easily removed with nail polish remover or alcohol (or gasoline on a Q-tip).
Another option would be to purchase a reduced rate sticker. You can purchase a 2nd State Park sticker for $10. You need to provide them with the serial number from a sticker you already own.
I get a sticker included in my Patron’s license, and always pick up a 2nd one for the 10 bucks. Its a good thing.
04/27/2002 at 1:07 am #1739395A few weeks ago I bought a new car and tried the hair drier. I’m happy to report that both stickers came off nicely and look like new applied to the new car.
Now, how to I apply a state sticker to my motorcycle that doesn’t even have a windshield???
Steve Bukosky
Waukesha04/27/2002 at 2:09 am #1739396AHA! Steve… you just stumbled upon the easy solution to using a single park sticker with multiple vehicles the EASY way!
Get a motorcycle helmet, be sure it is the type with the plastic flip-down face wind shield. Place the sticker on the lower left corner of the face shield. Viola! You are now set for riding your cycle into any park, with your sticker prominently displayed. If you decide to take your car or truck to the park, NO PROBLEM! just wear your helmet in the car! No law against that, is there?
04/27/2002 at 1:18 pm #1739397quote:
Originally posted by sbukosky:
Now, how to I apply a state sticker to my motorcycle that doesn’t even have a windshield???When I got my stickers, I asked a park ranger this same question. (I do have a windshield, but it is detachable and I have it off most of the time.)
The official word: The sticker must be applied to something that is a permanent part of the motorcycle… hard bags, side covers, wrapped around the fork tubes, etc. It should be on the left side so it can easily be seen at the entrance stations.
I couldn’t bring myself to ruin the paint on my motorcycle, so I ended up just sticking it to my windshield. (I now have to make sure the windshield is on before going to any state park though…)
If you come up with a clever way or place to put these on motorcycle without a windshield, please share it!
04/27/2002 at 3:41 pm #1739398What are the rules for the one day stickers that you buy?
Since I have a Conservation Patron’s license, all I need to do is show them my license and they give me a day pass.
I wonder where I would put it since it is similar to a “post-it” note
[This message has been edited by GrouseTales (edited April 27, 2002).]
[This message has been edited by GrouseTales (edited April 27, 2002).]
04/28/2002 at 2:08 am #1739399quote:
Originally posted by Thraxman:
Get a motorcycle helmet, be sure it is the type with the plastic flip-down face wind shield. Place the sticker on the lower left corner of the face shield. Viola! You are now set for riding your cycle into any park, with your sticker prominently displayed. If you decide to take your car or truck to the park, NO PROBLEM! just wear your helmet in the car! No law against that, is there?Harley riders would have to stick it on their foreheads? I’ve wondered what a patrolman would think about someone wearing their helmet in a car. I’ve got a black full face with a smoke shield. Makes me look a little like Darth Vader with my black leather jacket, black jeans and boots. Sometimes if I don’t pay at the pump, I’ll walk in to pay with the helmet on and visor down. Gets the attendants nervous.
As to being attached to a permanent part of the motorcycle, before I began geocaching, my wife thought I WAS a permanent part of my motorcycles!
Steve Bukosky
Waukesha04/28/2002 at 2:47 am #1739400quote:
Originally posted by GrouseTales:
Since I have a Conversation Patron’s license,What do you have to do to get a ‘Conversation Patrons’ license, just talk to them alot?
Seriously, what is this license?
04/28/2002 at 4:07 am #1739401Thanks for the hair dryer suggestion to remove lables. We had tough US Military lables to remove from 20 surplus containers today in preperation for the geo-campout. The dryer worked like a charm!
Thanks again!
04/28/2002 at 4:50 am #1739402Oops, should have been Conservation Patron license.
Basically, it covers gun deer hunting, gun bow hunting, small game, spring turkey, fall turkey hunting, fishing, trapping, veh admission sticker, magazine subscription, trail pass.
04/28/2002 at 12:44 pm #1739403quote:
Originally posted by sbukosky:
A few weeks ago I bought a new car and tried the hair drier. I’m happy to report that both stickers came off nicely and look like new applied to the new car.Now, how to I apply a state sticker to my motorcycle that doesn’t even have a windshield???
Had the same problem while I was in the military; we had base stickers to contend with. I couldn’t bear to put a sticker on my new FLTC back in 81, so I manufactured a plate and attached it to the left side of the front fender. Then just put the sticker on the plate. Two bolts and it was off.
-
AuthorPosts
You must be logged in to reply to this topic.